Series F Panel Roll Forming Machine
The Series F Panel Roll Forming Machine is a through-spindle
model and was built especially for a product that has a
variety of overall widths, such as drywall studs and door
panels. This model has three outstanding features that
distinguish it from previous panel mills.
-
First, with the use of solid telescoping
spindles and a fully supported heavy
outboard housing, you can obtain an
enormous strength advantage over
conventional, unsupported, overhung
stub-type machines.
-
Second, width changes can be obtained
simply by a turn of a crank or the push
of a button. This can reduce tooling
changeover time to minutes (the Series F
Panel Mill can be made with one or both
sides adjustable).
-
The third feature is lower cost. Since
this model has only one bank of drive
housings, versus the two banks required
for the old design panel mill, this
model is much less expensive.
|
Specifications:
Our
self-contained drive stands, with individual oil supplies,
permit quick removal and rearrangement of units without
having to drain oil from all units. Double bearing support
on both top and bottom spindles of the drive unit, gives
added
rigidity
and lasting alignment. The individual worm shaft drive
features chain-type
couplings for linking units together. Worm
gears are made of high-quality gear bronze for longer life.
Gearing
arrangement keeps the gear train in mesh through a complete
range of vertical shaft adjustments for different roll
diameters. Roll spindles and worm shafts are precision
machined and ground from high-quality carburized and
hardened steel, providing a hard, wear-resistant outer case
and an extremely tough core for increased life and lasting
accuracy. Outboard housings are positioned along the length
of the roll spindles.
The machine
base is an all-steel cabinet-type base, rigid, with welded
construction.
There is a full-length “jog” cord for feed-up
or threading of the machine.
The machine can be painted in a variety of
colors.
Optional Features:
Extra base
length is available, as part of the original equipment, to
increase machine capacity at a future date.
To further
improve any roll forming operation, a complete line of
auxiliary items is available, such as adjustable entry
tables, adjustable side roll stands, and straightener units.
|
|
|
