Roll Forming Side Pass
Stands
Roll Forming Side Pass Stands are critical in many
Tube, Pipe
and
Roll Forming
applications. These units mount between driven passes and
assist in forming and guiding the coil or strip from pass to
pass. Generally configured with two non-driven rollers, they
come with a variety of adjustment features.
Features:
-
Can be
used to control camber, bow and flare of
the profile in specific cases.
-
Ideal
for heavy gauge and lighter gauge,
higher strength materials.
-
Can
reduce scuffing or galling on the
material by spreading out the forming
stresses.
-
Twin
(independent) lead screws to adjust for
asymmetrical or non-centered
applications.
-
Single
lead screw option for symmetrical or
centered applications.
-
Can be
customized to suit almost any need.
|
|
|
|
